How to Clean Tv Screen? A Few Tips When It Comes to Cleaning Any Screens!
Thank you for nothing, smudged TV screens. Whether dust or annoying smudges emerge out of nowhere on your TV displays, it’s time to implement a basic cleaning procedure that takes care of it all. Quickly wipe your display clean and then settle in for some quality viewing.
Check the TV’s owner’s manual before making any assumptions about what will function in your household. The manufacturer’s instructions and warranty documents should be consulted first; if you can’t find them, though, you can still avoid damaging the screen’s pixels and circuitry by following the recommendations below.
Even while we discuss cleaning methods for glass-screen tube TVs and glass-coated iPad displays below, we realize that you are probably dealing with a flatscreen LCD or plasma television, which requires a different type of cleaning solution. Keep away from rough surfaces. Get rid of any dampness immediately. Never use toxic substances.
A Few Tips When It Comes to Cleaning Any Screens:
- Nothing hard or abrasive, just microfiber cloths that are gentle and lint-free. Plasma panels are especially susceptible to scratches, but even paper towels can damage a TV.
- To avoid damaging your screen, never spray cleaning directly on it. Simply mist it onto a cleaning cloth and wipe the screen clean.
- If you’re unsure how to clean something, it’s best to check with the manufacturer first. This is especially important if the only products you have on hand are harsh, poorly-reviewed chemicals.
Cleaning Plasma, Backlit Led Screens Made with Lcd (liquid-Crystal Display) Pixels and Oled Television Screens
- Before you clean your screen, make sure it has cooled down by turning it off. With the screen off, the fingerprints stand out more clearly against the bright background.
- Dust can be cleaned off with a dry microfiber cloth. Dust accumulation on ports and speakers might cause a drop in performance, so it’s a good idea to wipe off the entire screen, not just the screen’s surface.
- Spray a cleaning solution onto a dry microfiber cloth; you can buy one, or you can make your own using ingredients you probably already have on hand, like white vinegar and distilled water (one part vinegar to one part water) or rubbing alcohol and distilled water (one part water to one part alcohol). Keep in mind that the formulations may dry at different rates, and avoid saturating the material more than necessary.
- It’s best to stay away from harsh cleaners like ammonia, acetone, and high-proof alcohol.
- If you want to avoid leaving any moisture on the surface, you should wipe it down thoroughly. Don’t let the saturation level get too high around the screen’s edges.
- The screen needs to dry naturally.
- In addition, you can remove any lingering streaks by buffing them away with the dry edge of a fresh, dust-free microfiber cloth.
- If you happen to touch the screen or see a stain, wipe it off with a clean microfiber cloth so that it doesn’t attract dust.
Also Read: AirPod Pros: Everything We Know So Far
Cleaning Your Glass-Coated iPad Screen or an Old-School Tube TV
- Dust can be cleaned off with a dry microfiber cloth.
- Fingerprints and smudges can be removed with 70% isopropyl alcohol. Don’t use bleach; instead, mist it over a cloth or use a pre-moistened alcohol wipe.
- To clean the glass, start by wiping the surface and the edges, taking care to avoid getting any moisture into the ports or the speakers.
- The screen needs to dry naturally.
- Use a microfiber cloth to rub away any lingering streaks.
Cleaning Your Remote Control
Use the same wet microfiber cloth you used to clean the TV screen to thoroughly wipe off the remote if you cleaned the screen with vinegar or alcohol.
You don’t want to get any moisture in the buttons, so try to keep your hands as dry as possible.
Important hint: take out the batteries before you try to turn off the TV, or you can end up turning on the subtitles and switching the language to German (you know how it goes).